MUSTAFA JAWAD NUHMA

Microalgae, rich in lipids, offer a renewable source of green hydrocarbons, potentially reducing fossil fuel dependency. However, zeolite catalysts commonly used in conversion processes often suffer from short lifespans due to coke formation. This study investigates a lanthanum-modified HZSM-5 zeolite catalyst for converting crude microalgae oil into non-oxygenated hydrocarbons. The catalyst enhances acid sites crucial for conversion. Among variants, 10%La/HZSM-5 exhibits optimal performance, achieving maximum conversion, hydrocarbon yield, higher heating value, and deoxygenation. Lanthanum modification enhances catalytic conversion by adjusting acidic sites, promising benefits for diverse energy applications over costlier, less stable catalysts.

Alkaline–surfactant–polymer (ASP) flooding, a recognized method for oil recovery, encoun- ters limited use due to its expense. In addition, ASP’s best composition and injection sequence still remains uncertain today. This study explores conventional ASP flooding using PT SPR Langgak’s special surfactants, simulating Langgak oilfield conditions in Sumatra, Indonesia. By comparing the outcomes of this flooding technique with that of starch-assisted ASP performed in another study, the benefits of adding starch nanoparticles to flooding are evident. Nano-starch ASP increased oil recovery by 18.37%, 10.76%, and 10.37% for the three configurations investigated in this study. Water flooding preceded ASP flooding, and flooding operations were carried out at 60 ◦C. This study employed sodium hydroxide (NaOH), sodium carbonate (Na2CO3), and specialized surfactants from PT SPR. The adopted polymer is solely hydrolyzed polyacrylamide (HPAM) at 2000 ppm. Starch nanoparticles underwent comprehensive characterization and focused more on charge stability. Purple yam nanoparticles (PYNPs) exhibited remarkable stability at −36.33 mV, unlike cassava starch nanoparticles (CSNPs’) at −10.68 mV and HPAM’s at −27.13 mV. Surface properties affect interactions with fluids and rocks. Crystallinity, a crucial characterization, was assessed using Origin software 2019b. CSNPs showed 24.15% crystallinity, surpassing PYNPs’ 20.68%. Higher crystallinity benefits CSNPs’ thermal stability. The amorphous behavior found in PYNPs makes them less suit- able if applied in harsh reservoirs. This research correlated with prior findings, reinforcing starch nanoparticles’ role in enhancing oil recovery. In summary, this study highlighted conventional ASP flooding using HPAM as the sole polymer and compared it with three formations that used two starch nanoparticles included with HPAM, assessing their impact on charge stability, crystallinity, and recovery rate to emphasize their importance in the oil recovery industry. Starch nanoparticles’ benefits and limitations guided further investigation in this study.

This study aimed to address the challenges faced by mature oilfields in extracting substantial oil quantities. It focused on improving the efficiency of alkaline–surfactant–polymer (ASP) flooding technique, which is a proven tertiary recovery technology, to overcome scaling issues and other hindrances in its large- scale implementation. Appropriate materials and their suitable concentrations were selected to enhance the ASP flooding technique. Special surfactants from Indonesia were introduced to improve the interfacial tension reduction and wettability alteration. Reservoir rock model that resembling Langgak oilfield in Sumatra was utilized, and low-salinity water was employed to mimic the oilfield conditions. Starches derived from cassava nanoparticles (CSNPs) and purple yam nanoparticles (PYNPs) were combined separately with conventional hydrolyzed polyacrylamide (HPAM) polymer to enhance its performance. Sodium hydroxide and sodium carbonate were used as alkaline in final ASP formula. It was demonstrated from this research that only two combinations of ASP formulations have led to improved oil recovery. One combination utilizing PYNPs resulted in 39.17% progressive recovery, while the other combination incorporating CSNPs achieved 35% incremental oil recovery. The ASP combination that resulted in recovery rate of 39.17% was composed of sodium hydroxide (NaOH) at a concentration of 1.28 wt.%, PSC EOR 2.2 (0.98 wt.%), and a combined polymer consisting of HPAM (0.2 wt.%) and PYNPs nano-starch (0.6 wt.%). The second combination led to 35% recovery rate and involved NaOH also at concentration 1.28 wt.%, PSC HOMF (0.63 wt.%), and a combined polymer comprising from HPAM (0.2 wt.%) and CSNPs nano-starch (0.8 wt.%). These findings of this study highlighted the potential of this modified ASP flooding to enhance oil recovery in mature oilfields, thereby offering valuable insights for oil industry.

Significant amounts of oil remain in the reservoir after primary and secondary operations, and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study, new nano-polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85%, and that of cassava nanoparticles (CSNPs) was 90.53%. Synthesized materials were characterized through particle size distribution (PSA), Zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs, as found from the recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (−36.3 mV for PYNPs and −10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties, and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. A more incremental recovery (33.46%) was achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This paves the way for a new technology for polymer flooding that may replace the conventional method, which depends on partially hydrolyzed polyacrylamide (HPAM).

ue to their high lipid content, microalgae are one of the most significant sources of green hydrocarbons, which might help lessen the world’s need for fossil fuels. Many zeolite-based catalysts are quickly deactivated by coke production and have a short lifetime. In this study, a bimetallic Lanthanum-Cerium (La-Ce)-modified HZSM-5 zeolite catalyst was synthesized through an impregna- tion method and was tested for the conversion of hydrolyzed oil into oxygen-free hydrocarbon fuels of high energy content. Initially, hydrolyzed oil (HO), the byproduct of the transesterification process, was obtained by the reaction of crude oil derived from Chlorella vulgaris microalgae and a methanol. Various catalysts were produced, screened, and evaluated for their ability to convert algal HO into hydrocarbons and other valuable compounds in a batch reactor. The performance of HZSM-5 was systematically tested in view of La-Ce loaded on conversion, yield, and selectivity. NH3-TPD analysis showed that the total acidity of the La-Ce-modified zeolites was lower than that of the pure HZSM-5 catalyst. TGA testing revealed that including the rare earth elements La and Ce in the HZSM-5 catalyst lowered the catalyst propensity for producing coke deposits. The acid sites necessary for algal HO conversion were improved by putting La and Ce into HZSM-5 zeolite at various loading percentages. The maximum hydrocarbon yield (42.963%), the highest HHV (34.362 MJ/Kg), and the highest DOD% (62.191%) were all achieved by the (7.5%La-2.5%Ce)/HZSM-5 catalyst, which was synthesized in this work. For comparison, the hydrocarbon yield for the parent HZSM-5 was 21.838%, the HHV was (33.230 MJ/Kg), and the DOD% was 44.235%. In conclusion, La and Ce-loading on the parent HZSM-5 may be responsible for the observed alterations in textural properties; nevertheless, there is no clear correlation between the physical features and the hydrocarbon yield (%). The princi- pal effect of La and Ce modifying the parent HZSM-5 zeolite was to modify the acidic sites needed to enhance the conversion (%) of the algal HO during the catalytic deoxygenation process, which in turn raised the hydrocarbon yield (%) and increased the HHV and DOD%.

Despite the extensive research into the catalytic uses of zeolite-based catalysts, these catalysts have a limited useful lifetime because of the deactivating effect of coke production. This study looks at the use of Cerium (Ce) loaded HZSM-5 zeolite catalysts in the hydrocarbon and oxygenated chemical conversion from Chlorella Vulgaris microalgae crude oil. Characterization of structure, morphology, and crystallinity was performed after the catalysts were manufactured using the impregnation technique. Soxhlet extraction was carried out to extract the crude oil of microalgae. Transesterification reaction was used to produce algal hydrolyzed oil (HO), and the resulting HO was put to use in a batch reactor at 300 ◦C, 1000 rpm, 7 bars of nitrogen pressure, a catalyst to the algal HO ratio of 15% (wt. %), and a retention time of 6 h. To determine which Ce-loaded HZSM-5 catalysts would be most effective in converting algal HO into non-oxygenated molecules (hydrocarbons), we conducted a series of tests. Liquid product characteristics were analyzed for elemental composition, higher heating value (HHV), atomic ratios of O/C and H/C, and degree of deoxygenation (DOD%). Results were categorized into three groups: product yield, chemical composition, and carbon number distribution. When Cerium was added to HZSM-5 zeolite at varying loading percentages, the zeolite’s acid sites became more effective in facilitating the algal HO conversion. The results showed that 10%Ce/HZSM-5 had the greatest conversion of the algal HO, the yield of hydrocarbons, HHV, and DOD% (98.2%, 30%, 34.05 MJ/Kg, and 51.44%, respectively) among all the synthesized catalysts in this research. In conclusion, the physical changes seen in the textural characteristics may be attributed to Cerium-loading on the parent HZSM-5; nevertheless, there is no direct association between the physical features and the hydrocarbons yield (%). The primary impact of Cerium alteration of the parent HZSM-5 zeolite was to change the acidic sites required to boost the conversion (%) of the algal HO in the catalytic deoxygenation process, which in turn increased the hydrocarbons yield (%), which in turn increased the HHV and DOD%.

The continued burning of fossil fuels since the beginning of the last century led to higher emissions of greenhouse gases and thus leads to global warming. Microalgae are one of the most important sources of green hydrocarbons because this type of algae has a high percentage of lipids and has rapid growth, consumes the carbon dioxide in large quantities. Besides, the cultivation of these types of algae does not require arable land. This review aims to explain the suitability of microalgae as a biofuel source depending on the fat content, morphology, and other pa- rameters and their effect on the conversion processes of microalgae oil into biofuels by different zeolite catalytic reactions. It also discusses in detail the major chemical processes that convert microalgae oil to chemical products. This review sheds light on one of the most important groups of microalgae (Chlorella vulgaris microalgae). This review includes a historical overview and a comprehensive description of the structure needed to develop this type of algae. The most important methods of production, their advantages and disadvantages are also deliberated in this work.

Microalgae is one of the most important sources of green hydrocarbons and it is likely to reduce dependence on fossil fuels due to the high percentage fats of microalgae, and also has a rapid growth rate and consumes the carbon dioxide in large quantities. Besides, the cultivation of microalgae does not require arable land. This short review aims to explain the suitability of microalgae as a biofuel source depending on the content of lipids, and catalytic chemical processes to convert the crude oil of microalgae into biofuels by using different types of modified HZSM-5 zeolites. Also, this review sheds light on the different methods to modify HZSM-5 zeolite toward enhancing the selectivity of cracking and deoxygenation processes by using modified HZSM-5 zeolite with rare earth metals.

The micro-reactor device was fabricated from Teflon and tested as a tool for biodiesel synthesis process from micro algae using Dodecylbenzenesulfonic acid catalyst. The variables influenceing on the biodiesel yield were optimized. The maximum yield of biodiesel of 99% was obtained at the reaction conditions of (temperature: 373.15 K, residence time: 20 min, methanol/oil ratio: 20, co-solvent amount: 30 wt% and catalyst amount: 11wt%). The influence of water content also investigated and recommended to be less than 0.5 wt %. The acid value also reduced to a value of less than 0.5 % at the optimum reaction condition. DBSA was found highly active catalyst for the esterification and transesterification reaction in the micro – reactor device. Biodiesel was produced in microreactor device at a small residence time (20 min) compared to the very long time consumed by the conventional batch process. Isopropanol was used as a co-solvent in the process and showed highly active in the biodiesel production.

Biodiesel production from Chlorella sp. oil using dodecylbenzenesulfonic acid catalyst in the packed bed reactor filled with a cylindrical glass raschig rings was investigated. The best conditions for the esterification and transesterification reactions were found to be (process temperature: 373.15 K, residence time: 30 min, methyl alcohol/oil ratio: 30, and catalyst loading: 11 wt%) which provide a yield of 99%. The water content effect was tested and the best value for the production of more than 90% biodiesel yield should be less than 0.5 wt%. Acid value was found to be decreased strongly using the DBSA catalyst in the esterification reaction. DBSA was found to be a highly active catalyst for the transesterification of Chlorella sp. compared to the activity of H2SO4 catalyst. The residence time of only 30 min using the DBSA catalyst would make the process more economical process compared to the batch process …

The physical properties (viscosity, surface tension and density) were computed in laboratory using different laboratory equipment for binary and pure system at (P=1 atm and T=25 C). At mole fraction 0.5, the excess volume was found to be positive value while the deviation in viscosity and surface tension was found as negative values at the same mole fraction. Experimental excess properties were compared using Redlich-Kister equation and showed acceptable standard deviation. The inter molecular interaction of the 1-Butanol and Ethyl acetate found to be negligible and the vulnerability of the hydrogen bonds according to the FTIR spectra to a mixture of 1-Butanol and Ethyl acetate is consistent with the positive values of excess volume. Overlying the values of surface tension and the deviation in viscosity was found as negative values for all mole fractions studied.